About AMADSAS
An engineering-led automation company serving the Kingdom from Riyadh
AMADSAS is an engineering-led automation company that designs, manufactures, installs and supports control, monitoring and power systems, serving the Kingdom from its regional headquarters in Riyadh with engineering and manufacturing in India and the UAE.
Last updated:
Who we are
AMADSAS is led by engineers. Our engineering experience since 2009 covers more than 1,000 automation and monitoring systems installed for more than 1,000 customers, across data centres, pharma, industry, power and buildings.
We design, manufacture, install and support control, monitoring and power systems ourselves: PLC, SCADA and DCS, centralised monitoring, BMS and EMS, DG synchronisation and fuel automation, control and MV panels, and test facilities. Keeping these in one team means the engineers who design a system also answer for how it runs.
We serve the Kingdom from our regional headquarters in Riyadh, with engineering and manufacturing in India and the UAE: 9 locations, 3 manufacturing units and more than 47,000 sq ft of facilities, with 190+ engineers and specialists.
- years of engineering since 2009
- 16+
- automation and monitoring systems installed
- 1,000+
- engineers and specialists across design, build and service
- 190+
- operational assets connected to our monitoring platforms
- 2,000+
- data points processed every day
- 2M+
- centralised monitoring deployments in live operation
- 25+
Milestones in our engineering history
2009
Engineering practice begins
Smart automation solutions and test beds, and the start of the ABB channel partnership.
2013
ABB PLC, VFD and DCS
Automation solutions built on ABB PLCs, VFDs and DCS.
2017
Klemsan and Inovance; total engineering solutions
Partnership with Klemsan and Inovance PLC/VFD, and the launch of total engineering solutions focused on plant efficiency.
2020
Own products
Our own products developed and deployed across industry, including AQI hardware and software and our centralised monitoring platform.
2022
Investment in facilities
Investment in offices and a new manufacturing setup.
2023
Switchgear and new regions
ABB switchgear added to the scope, expansion across verticals and into the Middle East and Europe, working with large OEMs and end users.
2024
Manufacturing unit 2 and Kyland
Manufacturing unit 2 opens at Koregaon Bhima with CNC punching, bending, laser cutting, wiring and assembly, testing and QA. Partnership with Kyland.
FY24 & FY25
ABB No.1 Channel Partner in India
Recognised by ABB as its No.1 channel partner in India in two consecutive financial years.
2025
Helmholz and the Kyland award
Partnership with Helmholz, and the Kyland ‘breakthrough partner’ award at the Kyland global meet 2025 in Beijing.
2026
CUBIC and Riyadh
CUBIC modular systems added to our panel range, and the regional headquarters opened in Riyadh.
Certifications and recognition
ISO 9001:2015
Quality management
ISO 14001:2015
Environmental management
ISO 45001:2018
Occupational health and safety
ABB No.1
ABB No.1 Channel Partner in India, FY24 and FY25
Technology partners
- KOENIG
- Klemsan
What we hold ourselves to
- 01
Quality
Work is built and checked to documented procedures under ISO 9001:2015, from panel wiring to validation records.
- 02
Reliability
We design for systems that must keep running: redundant servers, tested panels and spare parts planned in advance.
- 03
Safety
Site and factory work follows ISO 45001:2018, with tests such as megger and loop checks completed before anything is energised.
- 04
Customer focus
Scope is set by what the site needs, and the client’s engineering and QA teams approve each stage.
- 05
Engineering ownership
The team that designs a system builds, commissions and maintains it, and answers for it over its life.
Capabilities
- 01
Design and engineering
System architecture, electrical, control and network design, and panel documentation in AutoCAD and EPLAN.
- 02
PLC, SCADA and DCS
Design, programming and commissioning of PLC, SCADA and DCS systems, including redundant configurations and legacy migration.
- 03
Centralised monitoring
Our centralised monitoring platform unifies EMS, BMS, utilities and production machines, with 25+ deployments in live operation.
- 04
Panel manufacturing
APFC, MCC, PCC, drive and MV panels, IEC 61439 CUBIC modular systems and E-House prefabricated substations.
- 05
Power systems
DG synchronisation, EPMS, HSD fuel automation and switchgear integration for data centres and power plants.
- 06
Test facilities
Custom test beds for motors, generators, alternators, inverters, turbines and engines, with load banks.
- 07
Installation and commissioning
Cable trays, cabling, termination, testing and commissioning by our own site teams.
- 08
Validation and AMC
Computer system validation per GAMP 5 and lifetime support under annual maintenance contracts.
Facilities
Our facilities span 9 locations and 3 manufacturing units with more than 47,000 sq ft: the regional headquarters in Riyadh; manufacturing and an office in Abu Dhabi; the Pune engineering centre and manufacturing unit 1 (15,000 sq ft, panel assembly, testing and software development); manufacturing unit 2 at Koregaon Bhima (25,000 sq ft); the Nashik R&D and test facility for tests up to 1 MW; and offices in Mumbai, Bengaluru, Chennai and Kolkata. A new factory is under construction.
CNC punching
Enclosure and mounting-plate cut-outs punched to the panel drawings.
CNC bending
Sheet-metal parts formed to consistent dimensions for enclosures and frames.
Laser cutting
Precise cutting of sheet-metal parts and openings.
Wiring and assembly
Panel assembly and wiring to the approved schematics and wire schedules.
Testing and QA
Functional testing and quality inspection before factory acceptance testing and dispatch.
47,000+ sq ft · 3 manufacturing units · 9 locations
Locations
Saudi Arabia
Riyadh
Regional headquarters, Kingdom of Saudi Arabia
United Arab Emirates
Abu Dhabi
Manufacturing and office – 1,500 sq ft
India
Pune
Engineering centre and manufacturing unit 1 – 15,000 sq ft
India
Koregaon Bhima
Manufacturing unit 2 – 25,000 sq ft
India
Nashik
R&D and test facility up to 1 MW
India
Mumbai
Regional office
India
Bengaluru
Regional office
India
Chennai
Regional office
India
Kolkata
Regional office
Our team
Our team of 190+ engineers and specialists covers every stage from design to AMC, so each project draws on the roles it needs from one pool.
- Project managers
- Electrical engineers
- PLC/SCADA engineers
- Automation engineers
- Commissioning engineers
- Panel manufacturing team
- Service and AMC engineers
- AutoCAD/EPLAN designers
- QA/QC inspectors
Frequently asked questions
Where is AMADSAS based?
Our regional headquarters for the Kingdom is in Riyadh. Engineering and manufacturing are carried out in India — Pune, Koregaon Bhima and Nashik — and in Abu Dhabi.
How long have you been doing this work?
Our engineering experience goes back to 2009, more than 16 years. Over that time we have installed more than 1,000 automation and monitoring systems.
Which technology partners do you work with?
We are an authorised partner for ABB, Kyland, KOENIG, Helmholz, CUBIC, Klemsan and Inovance, and were ABB’s No.1 channel partner in India in FY24 and FY25.
Which certifications do you hold?
ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018.
Do you only work with your partners’ equipment?
No. We integrate equipment already installed at the site over open protocols, and select new equipment to suit the project.
Let’s start by understanding your facility
Send us a short description of the site and its current systems, and an engineer will come back with clear next steps.