Automation and monitoring engineering · Riyadh
Automation that keeps your facility running, and proves it with data
AMADSAS is an automation engineering company that designs, builds, installs and supports control, monitoring and power systems for data centres, pharmaceutical sites and industrial plants in Saudi Arabia, with engineering experience since 2009 and more than 1,000 systems installed.
- L1FieldSensors, meters, actuators, cabling
- L2ControlPLC, DDC and control panels
- L3SupervisionSCADA, alarms, historian
- L4EnterpriseReports, dashboards, compliance
Figures from delivered projects
- years of engineering since 2009
- 16+
- automation and monitoring systems installed
- 1,000+
- engineers and specialists across design, build and service
- 190+
- operational assets connected to our monitoring platforms
- 2,000+
- data points processed every day
- 2M+
- centralised monitoring deployments in live operation
- 25+
ABB No.1 Channel Partner in India, FY24 and FY25
- ISO 9001:2015
- ISO 14001:2015
- ISO 45001:2018
How we work
We cover the whole automation pyramid, from the sensor to the boardroom
Most failures and gaps sit between layers: a sensor that never reaches the system, or an alarm that never reaches the person who decides. So we engineer all four layers and connect them as one accountable system.
Layer 1
Field: trustworthy measurement at the source
We select and install sensors, meters and actuators, then route, terminate and test every cable before commissioning, because every later decision depends on the first reading being right.
- Temperature, humidity and differential pressure sensors
- Energy meters and fuel level instruments
- Cable routing, termination and insulation testing
Layer 2
Control: panels we build and test ourselves
We design and manufacture control and power panels in our own facilities, program the PLCs and DDCs, and run factory acceptance tests before shipping, so panels arrive ready to commission.
- PLC, DDC and VFD panels
- MCC, PCC, APFC and medium-voltage panels
- DG synchronising panels
Layer 3
Supervision: live visibility and alarms that are never lost
We connect scattered systems to a central SCADA platform on redundant servers that shows values live, archives them, and escalates any deviation by email and SMS.
- Redundant SCADA and database servers
- Alarm and event management
- Historian and long-term trends
Layer 4
Enterprise: reports that stand up to an audit
We turn data into reports, dashboards and tamper-evident audit trails with electronic signatures and role-based access, aligned with 21 CFR Part 11.
- Data, alarm and audit reports in PDF
- Energy and PUE dashboards
- Validation documents per GAMP 5
Sectors
Solutions built around what your facility has to prove
A data centre is judged on uptime, a pharmaceutical plant on the integrity of its records, a factory on line efficiency. We start from that measure, then choose the system.
- 01Data centresEPMS, diesel fuel automation, DG sync, chiller plant and BMS on one redundant platform.
- 02Pharma & life sciencesCleanroom EMS, LAF, AHU BMS and door interlocks with Part 11 records, validated per GAMP 5.
- 03Industry & manufacturingPLC, SCADA and DCS automation, control panels and plant-wide monitoring for running plants.
- 04Power & utilitiesPower plant automation, HT switchgear, DG sync, EPMS and test facilities up to 33 kV.
- 05Buildings & infrastructureBMS, lighting, energy and chiller plant control for business parks, campuses and infrastructure.
Centralised monitoring platform
Every utility on one screen, every change on record
Our centralised monitoring platform brings environmental, building, utility and production systems into one redundant SCADA system, with an audit trail, electronic signatures and inspection-ready reports.
- Redundant by design
- Primary and secondary SCADA servers, replicated databases and a redundant industrial Ethernet ring.
- Tamper-evident audit trail
- Every change is logged with previous and new value, user, comment and timestamp.
- Dual electronic signature
- Setpoint changes require role-based access and verification by two signatures.
- Multi-channel alarms
- Instant alerts by email, SMS and messaging apps.
ROOMS · DIFFERENTIAL PRESSURE / TEMP / RH
Filling A
15Pa
21.4°C · 45%
Filling B
14Pa
21.8°C · 47%
Buffer
11Pa
22.1°C · 49%
Change rm
8Pa
22.6°C · 52%
Corridor
6Pa
22.9°C · 50%
Wash
12Pa
23.0°C · 55%
TREND · FILLING A · DP24 h
AUDIT TRAIL · 21 CFR PART 11READ-ONLY
| 10:42:18 | DP high SP · Filling A | 18 → 17 Pa |
| 10:41:55 | Alarm ack · Change rm | DP warning |
| 09:03:07 | Report signed · Daily EMS |
- tags in a single pharmaceutical deployment
- 520,000
- servers in that architecture
- 8
- concurrent web clients
- 50
Communication protocols
- Modbus TCP
- OPC UA
- BACnet IP
- SNMP
- MQTT
- Profinet
- EtherNet/IP
Data centre references
Systems running in data centres that cannot go down
A selection of delivered data centre projects and the system handed over at each site.
| Client | Site | System delivered |
|---|---|---|
| Amazon Web Services | Lumina data centre | HSD automation |
| NTT Global Data Centers | Nav 1 | HSD automation |
| NTT Global Data Centers | DC09 | HSD automation |
| NTT Global Data Centers | Nav 2 DC03 | Fuel management system |
| Reliance Jio Infocomm | Versova | EPMS and HSD automation |
| Reserve Bank of India | Greenfield data centre, Bhubaneswar | EPMS and HSD automation |
| Infineon | Bengaluru data centre | Chiller plant management |
Manufacturing
Our panels are built and tested in our own facilities before they reach your site
We operate three manufacturing units within more than 47,000 sq ft of facilities, covering CNC punching and bending, laser cutting, wiring and assembly, and quality testing.
- manufacturing units
- 3
- sq ft of facilities
- 47,000+
- test facility capacity
- 1 MW
- CNC punching
- CNC bending
- Laser cutting
- Wiring and assembly
- Testing and QA
Design to AMC
One accountable team for the life of the system
We don’t stop at handover. The team that designed the system maintains and extends it.
- 01
Study and consulting
Objectives, site assessment and a solution roadmap.
- 02
Design and engineering
HLD/LLD architecture, electrical, control and network design.
- 03
Supply and factory testing
Equipment sourcing and factory acceptance testing before shipping.
- 04
Installation and commissioning
Installation, integration, testing and performance validation.
- 05
Operation and maintenance
24x7 monitoring and support, preventive and corrective maintenance.
- 06
Annual maintenance contracts
A dedicated support team and spare-parts management.
- 07
Upgrades and modernisation
Technology upgrades, legacy migration and capacity expansion.
Clients
Trusted by operators of critical assets
A selection of clients we have delivered automation, monitoring, power and test systems for.
Technology partners
- KOENIG
- Klemsan
Start with a low-risk step
Readiness assessment: six weeks, read-only, no commitment
We review alarm, environmental and energy data from your existing systems without changing them, then give you a clear picture of gaps and improvement opportunities before any purchasing decision.
- Data-integrity gap report against ALCOA+
- Alarm-response analysis by area
- Energy baseline with a ranked savings shortlist
Frequently asked questions
What engineers ask before they start
What exactly does AMADSAS do?
We design, build, install and support automation, monitoring and power systems: centralised SCADA platforms, building and environmental monitoring, electrical power monitoring, diesel (HSD) automation and generator synchronisation, control panels and test benches. After handover we support the system under annual maintenance contracts.
Do you work with our existing systems or replace them?
We usually start by integrating with what is already installed, over protocols such as Modbus, BACnet, OPC UA and Profinet, adding an independent monitoring layer without taking control. Replacement or upgrade happens only where an assessment justifies it.
Are your systems aligned with 21 CFR Part 11 for pharmaceutical plants?
Yes. The platform provides a tamper-evident audit trail, electronic signatures, role-based access and PDF reports with user and QA review blocks, and we deliver URS, FS, DS, IQ, OQ and PQ validation documents per GAMP 5.
Where are panels built and how are they tested?
Panels are built in our own manufacturing units and tested at the factory under a factory acceptance test before dispatch, then tested again on site with continuity, insulation and loop checks before commissioning.
Which areas of Saudi Arabia do you cover?
We serve the whole Kingdom from our Riyadh headquarters, backed by our own design, manufacturing and commissioning teams.